1.Applications and Technical Parameters 

HSB-1 MODEL HIGH SPEED BRAIDING MACHINE is mainly used for braiding cable sheath with soft wire, cotton and plastic string in the cable industry. The machine is also used for braiding rope and soft string. 

2.16-Bobbin Braiding Machine Technical Parameters:

Warning!The screen swichesThe images metioned above could be swiched unlimitedly through the oval button below,You can set or control the machine freely no matter it works normally.This electromechanical power swich control box is equipped with a lock action.If you need to open the box to have a check,you have to turn the power to 0 and then you can open it.

There is a sign inside this electromechanical power swich control box. When being used, it should be guaranteed that it is well connected to the groud. Otherwise it may cause electric shock and fire!   

Note!

If the braid line card on the carriage and a slide rail, or forcible rotation can not dead lift carriage, guide surface to prevent injury. You can loosen the screws to remove the carriage jammed residual line and then pull the thread to weave points connected securely to continue weaving process.

The new machine is running, slide the slider with steel ring groove in the groove. After 50 hours the machine is running, the steel must be replaced with a nylon slider block. During the normal operation of the machine, the nylon block width is less than the block to be replaced when a new 11.6mm.

The new machine is running, the turntable track requires 300 hours of operation run-in period, in the run-in period, weaving speed is less than 120r/min, lubrication cycle automatic lubrication system must remain within six minutes, lubrication times in one second or more.

The high-speed weaving machine safety guard is closed, the machine and the ground under good working conditions fixed at the highest speed, noise ≤ 85db