Applications and Technical Parameters 

HSB-1 MODEL HIGH SPEED BRAIDING MACHINE is mainly used for braiding cable sheath with soft wire, cotton and plastic string in the cable industry. The machine is also used for braiding rope and soft string. 

Technical Parameters:

 Special Precautions

 Preboot Precautions 

Note that the machine running the machine should be observed regularly check the oil from the pipeline can successfully reach the lubrication points . Shall be filled within arm bracket rotating parts butter, butter must be filled to within 120 hours after each job .

Assembly and Overhaul Precautions

Some parts such as spindle bracket, sliding seat , etc., after the demolition repair or replace parts and then assemble the new , you must ensure precise distance sliding seat and lower ingot braided line. Recommended to be placed on a carriage and an ingot running on the slide carousel , so that the next anchor braid woven from the pendulum toward the point, do not be caught or cut off the carriage . 

When coarse spindle placed on two adjacent spindles stand outside by the pendulum towards the braided wire braided points, and Diego tight. When entering or braided line from the notch of the slide rails on the turntable , which is on the edge of the ingot from the carriage to be substantially equal. Can be adjusted by changing the distance of the gear frame forward or backward to achieve one or several gears . If one of the teeth can not be moved to adjust the distance to achieve precise , fine tuning according to the following steps : Unscrew the fixing screws on the inner ring of five , since the elliptical through- hole , the inner ring can move the carriage to achieve fine tuning , after adjustment tighten the screws in place . Swinging the remaining knitting yarns disposed on the carriage slide uniformly circular orbit , if the new installation height of the pendulum type , be adjusted to all of the stop lever with the same point .